Teac LP-P1000, Turntable Audio System Preset tuning (2), Wakeup timer (1), Setting the timer, 1Put the unit into standby (power off), 2Press and hold the TIMER button for at least two seconds

Preset tuning (2)

When using the remote control

The preset number appears on the left side of the display.

Example when preset 3 is selected

Preset number

ooWhen a preset station is selected, the MEMORY indicator appears.

ooAfter selecting a preset, this number will continue to be shown unless you select another station manually.

52

Wakeup timer (1)

At the set time, sound will be output from the speakers. ooAdjust the clock before setting the timer (page 25).

Setting the timer

1Put the unit into standby (power off).

The unit must be in standby to set the timer.

If the ring around the STANDBY/ON button is lit blue, the unit is on. Press the STANDBY/ON button to put the unit into standby.

2Press and hold the TIMER button for at least two seconds.

Press and hold for at

least 2 seconds

The timer indicator ( ) blinks and “SET TIMER” scrolls across the display once. “ON TIME” appears and then the time input mode becomes active.

Display example

c

c