Troubleshooting (1)

If you experience a problem with this unit, please check the following items before requesting service. Something other than this unit could also be the cause of the problem. Please also check that the connected devices are also being used properly.

If it still does not operate correctly, contact the retailer where you purchased the unit or TEAC customer support (See the back cover for contact information).

The unit will not turn on.

ee Confirm that the power plug is plugged into a working outlet. Then, press the STANDBY/ON button to turn the unit on. Confirm that there is power to the outlet by plugging in another device such as a desk lamp or tabletop fan (pages 14 and 27).

There is no sound.

ee Turn the VOLUME knob right to raise the volume.

Remote control does not work.

ee Press the main unit's STANDBY/ON button to turn it on.

ee If the batteries are dead, change the batteries.

ee Clear obstructions that are between the remote control unit and the main unit. Use the remote control unit within the 5 m (16 ft) range and pointed at the front panel.

ee If a lamp or other strong light source is near the unit, turn the light source off.

A nearby TV or other device is malfunctioning. ee Some TVs with wireless remote control functions

might malfunction in response to the operation of this unit’s remote control. In this case, turn the other device off while using this unit’s remote control.

There is noise.

ee Place the unit as far away as possible from TVs, microwave ovens and other devices that emit electromagnetic waves.

CD player

Playback is not possible.

ee If the disc is upside down, reload it with the labeled side up.

ee If the disc is dirty, wipe it clean.

ee Discs that do not have any recordings on them or that have not been finalized cannot be played back. Make sure that CD-R/CD-RW discs that you want to play back have recordings on them and have been finalized.

ee Depending on disc quality and recording condi- tions, playback of some CD-R/CD-RW discs might not be possible.

ee Programmed playback works with finalized discs only.

The sound skips.

ee Vibrations can cause the sound to skip. Place this unit in a stable location.

ee If the disc is dirty, wipe it clean.

ee Do not play any disc that is warped, deformed or damaged.

MP3/WMA files

Playback is not possible.

ee Check the file format. MP3 files are recognized by the “.mp3” file extension and WMA files by the “.wma” extension.

ee The MP3/WMA file might be damaged.

ee Confirm that the file format is one that this unit can play back (page 12).

The song name, artist name and album name do not appear on the display.

ee There is no ID3 tag information for the music file. Edit the song name, artist name, and album information of the song on a PC using a suitable application.

ENGLISH

Continued on the next page

57