Listening to a CD (1)

1Press the CD/Bluetooth button to select CD.

Press the CD/Bluetooth button again to switch between CD and Bluetooth.

After switching to CD, “DISC” will appear, “READING” will blink for several seconds, and then the CD will be in a stopped state. If no disc is loaded, “NO DISC” appears on the display.

2Press the open/close (-) button to open the tray.

The disc tray opens forward.

3Place a disc centered on the tray with the labeled side up.

ooNever place more than one disc on the tray.

ooIf the tray is closed while a disc is outside the center guides, the disc might become stuck inside and the tray might not open. Be sure to always place discs within the guides at the center of the tray.

ooDo not force the tray by hand when opening or closing.

4Press the open/close (-) button to close the tray.

Be careful not to let your fingers be pinched when the tray closes.

ooThe unit takes a few seconds to load the disc. No buttons will work when “READING” is displayed. Wait until the disc information is displayed.

30