3 From the Bluetooth device select “LP-P1000” (this unit).

ooIf a passkey is required during pairing, input “0000”.

When connection succeeds, the unit will make an electronic beeping sound, and the Bluetooth figure mark ( ) will appear on the display.

ooIf it cannot connect for two minutes or longer, “NO DEVICE CONNECTED” will scroll across the display and pairing mode will end.

ooThis unit can retain pairing data for up to five devices. After five devices have been paired, if a new device is paired, the oldest pairing will be overwritten.

ooWhen a Bluetooth device is connected, if you change the input with a function button or press the STANDBY/ON button to put the unit into standby mode, the next time the unit is turned on, the last connected Bluetooth device will automatically connect again assuming it is in range and has its Bluetooth function activated.

ooIf you disconnect from the other Bluetooth device, “NO DEVICE CONNECTED” will appear.

ooIf the other Bluetooth device is waiting to pair, pairing will occur automatically when this unit enters pairing mode.

Listening to records (1)

Before using the record player, use a coin or other tool to turn the transport locking screw clockwise until it stops. Remove the stylus cover (made of white plastic) (page 23).

1Press the PHONO/AUX button to select “PHONO”.

Each time the PHONO/AUX button is pressed, PHONO (record) and AUX (external component) are selected alternatively.

2Open the turntable cover slowly.

VV Be careful not to pinch your hand, for exam- ple, when closing the turntable cover.

ENGLISH

Continued on the next page

45