Setting the clock (1)

Set the current time before using the unit.

You can set the clock when the unit is in standby.

1Press the STANDBY/ON button to put the unit into standby.

NOTE

When the ring around the button is not lit blue, the unit is in standby. Note that the clock cannot be set when the unit is on.

2Press and hold the CLOCK ADJUST but- ton for at least two seconds.

Press and hold for at

least 2 seconds

“SET CLOCK” scrolls across the display.

3Press the TIME (j/k) buttons to switch between 24 HOUR and 12 HOUR (24- hour or 12-hour time display).

c3

ooIf a setting is left for more than 20 seconds, this time setting mode will end.

4Press the CLOCK ADJUST button again.

Display example

The “hour” value blinks.

5Press the TIME (j/k) buttons to set the current hour.

ENGLISH

Continued on the next page

25