Using the remote control
Precautions for use
ooWhen using the remote control, point it toward the remote control signal receiver on the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between the main unit and the remote control. ooThe remote control might not work if the remote control signal receiver on the main unit is exposed to sunlight or bright lights. In this case, try moving the
main unit.
ooBeware that use of this remote control could cause the unintentional operation of other devices that can be controlled by infrared rays.
Installing batteries
Remove the cover from the back of the remote control. Insert two AA batteries into the compartment according to the +/− indications. Then, close the cover.
When to replace batteries
If the distance required between the remote and main unit decreases or if the unit stops responding to the remote buttons, replace both batteries with new ones.
Dispose of the used batteries according to the instructions on them or requirements set by your local municipality.
VV CAUTION
Misuse of batteries could cause them to rupture or leak, which might result in fire, injury or the staining of nearby materials. Please read and observe the precautions on page 3 carefully.
22