Precautions for use

ooDo not place anything on the turntable cover. Objects on the cover might cause noise due to vibrations or fall off, especially during playback.

ooAvoid placing the unit in direct sunlight, close to a source of heat or in other similar conditions. Do not place the unit on top of an amplifier or other equipment that might generate heat that exceeds the operating temperature range of this unit. Doing so could cause discoloration, deformation or malfunction.

ooAs the unit could become warm during operation, always leave sufficient space around it for ventila- tion. When installing this unit, leave at least 20 cm (8") between it and walls. To allow good heat dis- sipation, leave a little space between it and other devices. When placing it in a rack, for example, leave at least 40 cm (16") open above it and 10 cm (4") open behind it. Failure to provide these gaps could cause heat to build up inside and result in fire.

ooDO NOT MOVE THE UNIT DURING PLAYBACK. During playback, the disc or the record rotates. Do not lift or move the unit during playback. Doing so may damage the disc, the record, the stylus, the cartridge or the unit.

ooAlways remove the disc or the record before relocating or moving this unit. Moving the unit with a disc inside or a record on the turntable could damage the disc, the record, the stylus and the cartridge or could cause a malfunction.

ooThe voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.

ooDo not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or TEAC customer support.

ooWhen removing the power plug from the wall outlet, always pull directly on the plug, never yank on the cord.

ooWhen a TV is on, depending on the TV broadcast electromagnetic wave conditions, lines might appear on the TV screen if the unit is turned on. This is not a malfunction of the unit or the TV. If this occurs, put this unit into standby mode (off ) when using the TV.

User registration

Customers in the USA, please visit the TEAC website (http://audio.teac.com/support/registration/) to register as a user online.

Maintenance

If the surface of the unit gets dirty, wipe it with a soft cloth or use diluted mild liquid soap. Allow the surface of the unit to dry completely before using.

Do not use chemical cleaning cloths, thinner or similar substances as they could damage the surface of the unit.

VV CAUTION

For safety, disconnect the power cord from the socket before cleaning.

ENGLISH

9