8When everything is ready, start recording by pressing the PAUSE key or the PLAY key whose arrow points in the same direction as the indicator.

To record on both tape sides, set the REV MODE switch to j or p and press the forward PLAY (y) key. If you press the reverse PLAY (h) key, recording will be done only on side “B”.

To stop recording, press the STOP (H) key.

ATo stop recording temporarily

Press the PAUSE key to stop recording temporarily.

A second press of the key resumes recording.

To erase recordings

When you make a recording, the tape is overwritten (previous recording is erased). To erase a tape without making a new recording, set the REC LEVEL control to the minimum (0) position and press the RECORD (K) key followed by the PLAY (hor y) key.

Quick record start

Press the RECORD (K) key and press the PLAY (h or y) key corresponding to the direction you want the tape to run.

Recording silence

When you press the REC MUTE key during recording, the unit records no signal for about 4 seconds and then enters the record-pause mode. To resume recording, press the PAUSE key.

<

To create a blank of more than 4 seconds long

ENGLISH

 

 

Hold down the REC MUTE key for the desired length of time.

 

 

When you release the key, the deck enters the record-pause mode.

 

 

 

< To create a blank of less than 4 seconds long

Press the PAUSE key within 3 seconds of pressing the REC MUTE key.

NOTE

If you press the REC MUTE key when the deck is in the record- pause mode, no signal is recorded for about 4 seconds, and then the deck shifts back to the record-pause mode.

15