Playback
3 |
| 2 |
| 4 |
15
1Turn the unit on.
Each press of the POWER button turns the unit on and off. The ring surrounding the POWER button and the display light up when the unit is turned on.
2Press the OPEN/CLOSE button.
The shutter opens and the disc tray slides out.
<The tray opens after a few seconds (this delay is normal and is due to movement of the VRDS and other mechanisms within the unit).
3Insert the disc, label side up.
<Make sure the disc is centered in the tray in order to avoid any malfunction or jamming of the tray or damage to the disc itself.
4Press the OPEN/CLOSE button again.
The disc tray and shutter close. Take care to avoid pinching your fingers in the moving tray.
<The unit reads the disc, which takes some time due to the reading and storing of the disc’s table of contents.
5Press the PLAY button to start playback.
Pausing playback
Press the PAUSE button to pause playback (the ring surrounding the PAUSE button on the main unit lights).
Press PLAY or PAUSE to restart playback.
Stopping playback
Press the STOP button (the ring surrounding the STOP button on the main unit lights).
Opening and closing the tray
Pressing OPEN/CLOSE opens the tray if it is closed, and closes it if it is open. When the tray is opened during playback, it may take a few seconds before the disc is “unloaded” and the tray opens.
12
