Changing the display mode
During playback, it is possible to change the display as shown here.
<The DISPLAY button doesn’t work during programmed playback.
Currently playing track | Elapsed time of current track | ||
|
|
|
|
|
|
|
|
|
|
|
|
Time remaining for current track
Total elapsed time (disc)
Total time remaining (disc)
MODE
1Repeatedly press the MODE button to select the menu item to be changed.
WORD 
DAC 
LAYER 
(normal display)
<If you leave the unit idle for 10 seconds, the setting mode will be cancelled.
2Use the SKIP buttons (.//) to select the options within the menu item.
Individual menu functions are described on pages
3Repeatedly press the MODE button until the display returns normal (or leave the unit idle for 10 seconds) to exit the setup mode.
Pressing the STOP button also finishes the setup mode.
<Switching off the power without exiting the setup mode may cause problems. Do not turn the unit off.
<Settings are stored even when power is turned off and the unit is unplugged. If left unplugged for an extended period, the settings may be lost.
16
