Teac X-01 D2 Settings Audio Setup, Analog output Analog Out, Digital output DigitalOut, CD Direct

Settings (Audio Setup)

Analog output (Analog Out)

When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.

2ch

Outputs 2-channel audio from the the i.LINK (AUDIO) and the 2ch analog audio output terminals (FRONT L and R).

If multi-channel program material is played, the multi-channel material will be down mixed to two channels, and the DOWN MIX indicator lights on the display.

Multi ch

The unit outputs the multi-channel surround sound.

Select this when the i.LINK (AUDIO) terminal or the 5.1ch analog audio output terminals are connected to a surround sound amplifier.

<5.1CH indicator lights when “Multi ch” is selected.

<Note that if “Multi ch” is selected, only the front L/R sound of the multi-channel material will be output from the FRONT L and R terminals.

<Note that the audio volume changes when the mode is changed between 2-channel to multi-channel.

<Speakers should be set up properly for multi-channel use. See page 22 for details.

<You can also use the 2CH/MULTI button of the remote control unit to select either “2ch” or “Multi ch”.

When playback is stopped, press the 2CH/MULTI button.

Digital output (DigitalOut)

When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.

ON

Audio is output from the i.LINK (AUDIO) terminal and the DIGITAL OUT terminals.

OFF

Audio is not output from the i.LINK (AUDIO) terminal and the DIGITAL OUT terminals. If you are not using these terminals, we suggest that you use this OFF setting for better analog sound.

<	Digital sound from Super Audio CDs cannot be output from	ENGLISH
	the DIGITAL OUT terminals.

CD Direct

When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.

Direct

Speaker setting is bypassed.

Normal

The speaker setting you have made is used.

Select this setting when the i.LINK (AUDIO) terminal or the 5.1ch analog audio output terminals are connected to a surround sound amplifier.

21