CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

<Do not expose this apparatus to drips or splashes.

<Do not place any objects filled with liquids, such as vases, on the apparatus.

<Do not install this apparatus in a confined space such as a book case or similar unit.

<The apparatus draws nominal non-operating power from the AC outlet with its POWER switch in the off position.

<The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time.

<An apparatus with Class ! construction shall be connected to an AC outlet with a protective grounding connection.

<Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

<DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN!

<IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.

<USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the equipment and/or the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Changes or modifications to this equipments not expressly approved by TEAC CORPORATION for compliance will void the user’s warranty.

2

Page 2
Image 2
Teac X-01 D2 owner manual Important Safety Instructions, For U.S.A

X-01 D2 specifications

The Teac X-01 D2 is a premier audio component that has garnered attention among audiophiles and music enthusiasts. Designed with a keen focus on sound quality and advanced technology, it is celebrated for its exceptional playback capabilities and versatile features.

At its core, the Teac X-01 D2 is a high-end CD player that seamlessly combines modern digital advancements with classic analog design principles. It features a high-precision, slot-loading disc mechanism that not only enhances the convenience of use but also contributes to minimized vibrations during playback. This ensures that the audio signal remains clean and unaffected, resulting in superior sound quality.

One of the standout features of the X-01 D2 is its Dual-DAC architecture, utilizing two high-performance Digital-to-Analog Converters. This design allows for greater detail and dynamic range in audio playback, providing listeners with a rich and immersive experience. The unit supports various audio formats, including standard CDs, as well as high-resolution audio files, ensuring that users can enjoy their music in the utmost fidelity.

The incorporation of TEAC's proprietary technologies also elevates the performance of the X-01 D2. The Ultra-Linear Circuitry minimizes noise and distortion, while the high-quality, low-jitter clock circuitry ensures accurate signal processing. As a result, the audio produced is remarkably clear and precise, showcasing the nuances in even the most complex musical pieces.

Additionally, the Teac X-01 D2 includes multiple digital outputs, allowing users the flexibility to connect to a range of audio systems. These outputs include AES/EBU, coaxial, and optical connections, making it compatible with various audio equipment. The unit also features an analog output, providing connection options for those who prefer a classic analog connection to their amplifiers.

User-friendly controls and an intuitive interface further enhance the overall experience with the X-01 D2. Users can easily navigate through their music collection, adjusting settings and playback modes with ease. Its sleek design, complemented by a high-quality build, ensures that it fits seamlessly into any audio setup, both aesthetically and functionally.

In summary, the Teac X-01 D2 stands as a testament to the brand's commitment to quality and innovation. With its advanced technologies and features, it delivers an unparalleled listening experience that is sure to satisfy even the most discerning audio enthusiasts.