Chapter 6
Troubleshooting
6.1 General SpeedTouch™ Troubleshooting
SpeedTouch™ does not work
SpeedTouch™ unreachable
If none of the LEDs light up, make sure that:
The SpeedTouch™ is plugged into a power socket outlet.
You are using the correct power supply for your SpeedTouch™ device.
The power requirements for your SpeedTouch™ are clearly indicated on the identification label on the bottom of the SpeedTouch™.
The SpeedTouch™ is turned on via the push button at the back panel.
If your SpeedTouch™ is cannot be reached due to misconfiguration, you might consider a hardware reset to factory defaults as described in “6.4 Reset to Factory Defaults” on page 112.
! | However, note that resetting the SpeedTouch™ to its factory settings will |
revoke all the changes you made to the configuration. |
Poor SpeedTouch™ | Make sure that the SpeedTouch™ is installed and configured as instructed in the |
performance | Installation and Setup Guide or as instructed by the Service Provider. |
106 | |
|