Chapter 2
Local Network Setup
To install Windows USB drivers
The first time you connect the SpeedTouch™ to your computer through the USB port, you will be prompted for a USB driver as soon as you plug the USB cable into the computer.
You can find the required USB driver software on the Setup CD. The installation is Plug and Play, meaning that installation requires almost no effort.
Proceed as follows:
1Insert the blue USB cable into the SpeedTouch™ USB port marked with the USB logo:
A USB logo looks like this: 
2Insert the other end of the USB cable into (one of) the USB port(s) of your computer. In most cases your computer's USB port is marked with the same USB symbol.
You can also connect your computer to the SpeedTouch™ via a USB hub.
Microsoft Windows will automatically recognise the Thomson USB Remote NDIS device.
The Windows Found New Hardware Wizard appears:
This wizard will guide you through the installation procedure of the USB drivers.
3Click Next to continue.
The Windows Found New Hardware Wizard may ask your authorisation to connect to Windows Update to search for software. If this is the case, select No, not this time, and then click Next.
4Select Install the software automatically (Recommended), and then click Next.
The USB driver is being installed. After a while a completing dialogue will appear.
5Click Finish to complete the installation.
Your USB connection is installed and ready for use.
18 | |
|