Chapter 1
Getting to know your SpeedTouch™
1.2.3 Access via FTP
To access the SpeedTouch™ via the File Transfer Protocol (FTP)
File system
To open an FTP session
You can access the file system of the SpeedTouch™ via the File Transfer Protocol (FTP), in order to:
Restore or back up configuration files, templates or language packs.
Upgrade your configuration.
The SpeedTouch™ file system is stored on
Proceed as follows:
1Open a Command Prompt window.
In Microsoft Windows XP for instance:
1On the Windows taskbar, click Start.
2Select (All) Programs > Accessories > Command Prompt.
2At the prompt, type ftp followed by the IP address of your SpeedTouch™ (192.168.1.254 by default).
3Enter your SpeedTouch™ security user name and password.
The default user is ‘Administrator’ and the default password is blank.
The example below shows an FTP session to the SpeedTouch™ file system.
File system structure The structure of the file system is very simple: it consists of a single root directory called root and a subdirectory called dl (download).
The root directory contains:
all the necessary files for the SpeedTouch™ to start correctly
the dl directory
The dl directory contains the software image.
If you made changes to the SpeedTouch™ configuration and saved them, a user.ini configuration settings file is created in the dl subdirectory.
10 | |
|