To start a Telnet session

Chapter 1

Getting to know your SpeedTouch™

Proceed as follows:

1Open a telnet application.

You can use the Command Prompt window.

In Microsoft Windows XP for instance:

1On the Windows taskbar, click Start.

2Select (All) Programs > Accessories > Command Prompt.

2Connect to your SpeedTouch™.

In the Command Prompt window:

At the prompt, type telnet followed by the IP address of your

SpeedTouch™ (192.168.1.254 by default).

3 Enter your SpeedTouch™ security user name and password.

The default user is ‘Administrator’ and the default password is blank.

As soon as you have opened a session to the CLI, the SpeedTouch™ banner is displayed, followed by the CLI prompt, as shown in the example below.

Username : Administrator

-----------------------------------------------------------------------

-

 

 

 

 

 

 

______

SpeedTouch

 

*

 

 

 

 

 

 

 

*

 

 

 

 

___/_____/\

 

Version 5.4

*

 

 

 

 

/

 

 

/\\

*

 

 

 

_____/__

 

 

/

\\

Copyright (c) 1999-2005,

*

 

 

 

_/

/\_____/___ \

*

 

 

 

//

/

\

\

/\ \

 

 

THOMSON

*

 

_______//_______/

 

/ _\/______

 

 

*

__/

/

/ \

\

 

/

/ /

 

/\

 

 

*

/

 

\

\ /

 

/ /

 

/ _\__

*

/ /

/

 

\_______\/

 

 

/ /

 

/ /

 

/\

* /_/______/___________________/ /________/ /___/

\

* \ \

\

/

___________

 

 

\ \

 

\ \

\

/

*

\_\

\

 

/\

\

 

\ \

 

\ \___\/

*

\

\/

 

/

\

\ \

 

\

/

 

*

 

\_____/

 

 

/

 

\ \________\/

 

 

*

 

/__________/

 

\

\

/

 

 

 

*

 

\

 

_____

\

 

/_____\/

 

 

 

*

 

\ /

/\

\

/

/___\/

 

 

 

 

*

 

 

/____/

\ \

 

 

 

 

 

 

*\ \ /___\/

*\____\/

-----------------------------------------------------------------------

{Administrator}=>

E-DOC-CTC-20051017-0153 v1.0

9