Chapter 5

SpeedTouch™ Web Interface

5.5.2 Telephony

Introduction The SpeedTouch™ is equipped with:

Two Phone ports allowing you to connect up to two phones for making phone calls over the Internet.

One PSTN port allowing you to make phone calls over the Public Switched

Telephone Network (PSTN) network.

For more information on how to set up your Voice over IP (VoIP) network, consult the User’s Guide on the SpeedTouch™ Setup CD.

Overview On this page you can view information on your current VoIP configuration.

Configure On this page you can disable/enable the VoIP service by selecting or clearing the Service Enabled check box.

Expert Configure On this page you can view/change the following MGCP parameters:

Call agent:

The IP address of your provider’s MGCP server.

Call agent port:

The port used by your call agent (usually port 2727). This port will be used to contact the call agent.

66

E-DOC-CTC-20051017-0153 v1.0