Technicolor - Thomson DTH 2000 Sound and picture, Virtual Surround Sound, Picture soft / sharp

Start playback using PLAY button.

Sound and picture

Virtual Surround Sound

For DVDs

Playing Dolby Digital (AC-3) 5.1 channel DVDs you can hear virtual surround sound as if comming from non- existant rear speakers (even if you use only a stereo TV or a two-channel stereo system).

1

2

Start playback using PLAY button.

Press virtual surround button on the top left part of the remote control:

a1x for a natural effect (VSS1),

b2x for a more emphasized effect (VSS2), and

cthe 3rd time, to cancel virtual Surround effect again.

•Virtual Surround sound may not be so impressive with some discs.

•Turn off the TV set surround sound and other surround effects (HiFi system) when using this virtual surround system.

•For optimum effects it is recommended that the distance between the TV set and the listening position should be about 3 or 4 times the distance between the left and the right front speakers.

96 kHz 24 bit

96 kHz 24 bit

on the player's front display

•You also can set surround sound via menu: Press the yellow

info button twice, then arrow. Set using arrows.

5 1 100

off

1 natural

2 emphasized

Picture soft / sharp

For DVDs and video CDs A B T 1 2 3 5 1 100

To have an appropriate setting for different quality video recordings.

1

2 Press the yellow info button twice; you see the Info strip on-screen (level 2).

3	Move to " ✕" picture using the	arrow.
4	Switch the picture mode as you require in three
	steps from sharp to soft using	arrows.

5 Exit the display with info button.

normal

soft

sharp

16	DVD remote control	6-7	Front and display	. . . .10	Sound and picture	16
	Menus	. .8	Access to a scene	14-15	Repeat play / karaoke	17