Technicolor - Thomson DTH 2000 user manual Subtitle , Audio , angle , etc

Appendix: what to do if ...

Before requesting service (troubleshooting)

Symptom

The subtitle is not displayed?

Subtitle (or Audio) setting cannot be changed?

You have forgotten your code number (password) to change the rating level?

Picture is not displayed correctly on the TV at 4 : 3 or 16 : 9 aspect ratio?

On-screen display messages are not shown on the TV screen?

The camera angle cannot be changed with the angle " " button?

The menu language is not the one you want?

Audio (spoken) and / or subtitle language is not the one selected during the initial player set-up?

Remedy

Subtitle ( ), Audio (), angle (), etc.

Disc menu operation and contents may differ from disc to disc. Please refer to the instructions accompanying the disc.

•Check if the subtitle is recorded on the disc.

•Subtitles are cleared from TV screen. See page 19 to display the subtitles.

•The disc being played has been recorded in only one language.

•Depending on the type of DVD, some segments limit the language selection.

•While in stop mode hold down PREVIOUS, PAUSE and STANDBY buttons of the unit simultaneously for more than

3 seconds. The password lock will be released and all initial settings will return to the default values.

Please note, that in this case you should switch the unit OFF and then back ON again. You will see a choice of menu language to be re-made. After pressing the corresponding numeric key on the remote control, you will need to proceed with the other initial settings, as you did when you first installed the unit. (set-up menu: page 23-29).

•According to your TV make the correct "TV Screen" settings in the set-up menu (page 24).

•Do not use zoom function on your TV, as parts of the picture and menu may be lost.

•The setting of "On-Screen Display" is set to "Off". Set it to "On" in the set-up menu (page 26).

•This function does not work when a DVD has not been recorded with a multi-camera angle system. Some DVDs use a multi- camera angle system only in certain portions of the DVD.

•The menu language for your player has not been set during set-up (page 22).

•Your preferred menu language on a DVD disc (if available) has not been set during set up (page 23).

•The menu is not available on the DVD disc in your language.

•If the audio or subtitle language is not available on the DVD disc, the language selected during initial player set-up will not be heard or seen. The disc's priority language (default language) is

selected automatically. If you want another language, press audio " " button and subtitle " " button in order to select it temporarily for this disc. (Or press menu button during playback, if the disc has its own language selection menu.)

44	DVD remote control	6-7	Front and display	. . . .10	Sound and picture	16
	Menus	. .8	Access to a scene	14-15	Repeat play / karaoke	17