Sound control | Technicolor - Thomson DTH 6000 guide

Use

Sound control

Sound selection in playback mode

VCR

1	Load a tape and press PLAY.	EN
2	Call the OVERVIEW menu using the MENU key and select the Sound mode line using	EN

3	the ▼ key.
3	Confirm with OK.
4	The SOUND MODE menu appears.
	Using the C or B key, select the sound tracks.
	Using the C or B key, select the sound tracks.
	- Stereo: stereo sound of the Hi-Fi tracks,
	- Mono: mono sound of the linear track,
	- Track 1: sound of the left track
	- Track 1: sound of the left track		Sound mode	BStereo
			Sound mode	BStereo

-Track 2: sound of the right track,

-Mix: sound of the mixed Hi-Fi and mono tracks.

VCR

If the tape was recorded in Dolby Surround or Dolby Pro Logic Surround, connection of a special

audio/video amplifier will allow you to reproduce these sound effects.

“DOLBY”, “Prologic” and the double-D symbol Laboratories Licensing Corporation.

are trademarks of DOLBY

Setting the type of sound to be recorded

The broadcast sound types are different from channel to channel. Your video recorder uses 3 tracks to record the sound:

-two HiFi tracks for stereo or bilingual sound (track 1 and 2),

-one normal track for mono sound or track 1 for a bilingual telecast.

Depending on the actual sound type of the TV channel (stereo, NICAM or mono), the video recorder will distribute the sound on these different tracks.

1Load a tape and press REC.

2Display the OVERVIEW menu using the MENU key, then select the Sound mode line with ▼.

3Confirm with OK.

		The SOUND MODE menu comes up.
	4		Sound mode	B Mono
		Select the Stereo, Mono, Track 1 or Track 2.

VCR

19

Image 19

Technicolor - Thomson DTH 6000 Sound control, Sound selection in playback mode, Setting the type of sound to be recorded

Contents

Contents Precautions and guarantee Box contents Basic connection ConnectionsOther connection possibilities Audio/video amplifier Other devicesPlayer, another video recorder, etc. AV2 socket Camcorder AV3 socket General functions Remote control Start recording Select a channel Access the contents menu of the disc Hifi Stereo Nicam Front panel controls Front panel display Store the channel and its number on the television set Initial InstallationModulator Automatic channel search Sorting the channels Clock setting Number with 0 to 9 keys New or encoded channel DVD Menus Disc content menusMenus VCR menus Playing a tape Recording with automatic stop instant record RecordingGetting prepared Simple recording Programming a recording VCR Programming using a PlusCode numberVideo PLUS+ system and satellite demodulator But select the AV1 or AV2 socket Error messages likely to occur when programmingWithout the PlusCode programming numbers To check your programming Deleting a programmed recording Delete the programmed recordings using the 0000 keyRecording programmed on a connected set Load a tape and press Play Sound selection in playback modeSetting the type of sound to be recorded Sound control Video PLus+ + 10 minutes Eco modePreferences Auto clock Index search Tracking and stability in play modeBy default Cassette type Shown on Other functions Variable slow motion DVD and video CD PlaySimple play Still image Frame advance DVD and video CD Standard Play all discs Play modes Lock TV Image DisplayOn-Screen Displays Digital Output Select the Sound option in the main menu using the PlaySound Sound Logic Audio LanguagesPlayer Menus Disc Menus Markers DVD and audio CD Direct accessInfo Menus Repeat playback all discs Audio channel video CD Audio DVDSubtitles DVD Camera angles DVD Skipping songs What is MP3?Reading MP3 files Playing an MP3 CD DVD-Video Discs you can play Problem Solution Troubleshooting Handling and care for discs Technical dataRemote control Concerning video tapes