Technicolor - Thomson DTH 6000 manual Initial Installation, Modulator, Automatic channel search

Set-up

Initial Installation

Modulator

If you haven't used a SCART cable (supplied) to connect your TV to the AV1 socket of the DVD/VCR, then proceed with the settings below before you go to channel set-up.

If you have used a SCART cable, go directly to the Automatic channel search section.

1Switch the DVD-VCR ON by pressing the B key on its front panel.

2Press the VCR key on the remote control.

3Hold down the MENU key on the remote control until SY4 comes up on the video recorder display.

4Validate your choice using the OK key.

Please wait: the video recorder is searching for a channel within the range 21 to 69, available for transmitting pictures to the television via the coaxial cable. After a while, the video recorder display indicates the channel that will be used

for this purpose. Note down the number here	.
5 Switch ON your television set.

Take the user manual of your television and carry out the steps below.

6Select an available channel number (a channel which has no picture).

7Follow the instructions of your television user manual to find the video channel of the video recorder (the one you noted down above).

Once the television has found the video channel of the video recorder, the

following message will be displayed on the screen (VCR, C CH 52 B).

If the picture is poor (snowy, torn), change the communication channel of the video recorder with the C / B keys.

8Store the channel and its number on the television set.

From now on, to watch the video recorder pictures or menus, select the channel assigned to the video recorder on your TV set, i.e. the channel number chosen in step 6.

9Continue with Automatic channel search.

Automatic channel search

The appliance has not been programmed to receive the channels in your area. Follow the automatic set-up procedure below to set up the channels.

1Switch the DVD-VCR ON by pressing the B key on its front panel.

2Press the OK key.

This video recorder comes with the NexTView Link feature. This function simplifies the channel set-up procedure, as the channels already set up on a TV set fitted with the NexTView Link or similar feature (Easy Link, Smart Link, Megalogic, etc.) can be downloaded to the video recorder. The channels downloaded this way to the video recorder keep the same properties as on your TV set (same number, same name, etc.).

10