1 Installation

1.2Placing your Thomson Gateway

Possibilities

You can mount the Thomson Gateway on a wall or simply place it on a desk.

Wall mount

Proceed as follows to mount the Thomson Gateway on a wall or other vertical surface:

1Take the wall mount leaflet out of the box.

2Stick the wall mount leaflet on the place where your want to mount your Thomson Gateway.

3Drill two holes through the marked positions.

4Fasten two screws in the wall holes. The screws should protrude five millimetres from the surface of the wall.

5Attach your Thomson Gateway on the wall using the two mounting slots on the bottom.

If you install the Thomson Gateway onto plasterboard, use dowels to secure the screws. Otherwise the strain of the cables connected to the Thomson Gateway rear panel connectors could pull the Thomson Gateway from the wall.

E-DOC-CTC-20080118-0051 v2.0

5

 

Page 11
Image 11
Technicolor - Thomson TG787 manual Placing your Thomson Gateway, Possibilities, Wall mount