Technicolor - Thomson TG787 manual Verifying Telephone Connectivity

3 Adding New Devices to your Network

4Enter the IP address and the port number of the registrar, and the proxy, as provided by your ISP:

5Click Apply.

Verifying Telephone Connectivity

Proceed as follows to verify the voice connection:

1Make sure the Thomson Gateway is turned on and ready for service.

2Check whether your phone is properly attached to the Thomson Gateway.

3Make sure the Internet telephony service is enabled and configured.

4The Voice LED must be solid green.

5Pick up your phone, wait for the dialling tone, and dial the number. If you dial a ‘#’ after the phone number, the phone number will be called instantly.

The phone(s) attached to the Thomson Gateway can receive incoming VoIP calls, as long as your Thomson Gateway is turned on and the Voice LED is lit.

For calls over the analogue phone line, your phones are line-powered by the telephone company and can therefore always be reached, even if the Thomson Gateway is turned off.

26 E-DOC-CTC-20080118-0051 v2.0