TechniSat CAM 1 plus Demultiplexing, Common Interface, Video decoding, Audio decoding

Demultiplexing:	in accordance with ISO 13818-1
Common Interface
Type	2 Common Interface slots for CI-modules
	(situated behind flap on front panel)
Current consumption	max. 0,3A/5V for each module
Video decoding:
Video compression	Compatible with MPEG-1 and MPEG-2
	Up to MP@ ML (main profile @ main level)
Video standard	PAL / 25 Hz
Active image area	720 pixels x 576 lines
Picture formats	4:3 / 16:9
Picture input 16:9	Automatic adjustment for 16:9 TV sets via SCART connection
	Letterbox filtering for 4:3 TV sets
Audio decoding:
Audio compression	MPEG-1 and MPEG-2 Layer I and II
Audio mode	Dual (main/sub), stereo
Sampling frequencies	32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Audio parameters:
Analogue output:
Output level L/R	0.5 V RMS (nominal)
Output impedance	600 Ohm
THD	>60 dB (1 kHz)
Crosstalk	< - 65 dB
Analogue input:
Input level L/R	0.5 V RMS (nominal)
Input impedance	> 40 kOhm
Volume at Switch-on	Automatic use of previous volume setting
Digital output:
Output level	0,5 Vss into 75 Ohm
Sampling frequencies	32 kHz, 44.1 kHz, 48 kHz
SP/DIF-Output	elektrical, cinch-connector
	optical, Toslink
Video parameters:
Input:
Input level FBAS	1 Vs-s +/- 0.3 dB into 75 Ohm
Input level RED	0.7 Vs-s +/- 0.1 Vp-p into 75 Ohm
Input level GREEN	0.7 Vs-s +/- 0.1 Vp-p into 75 Ohm
Input level BLUE	0.7 Vs-s +/- 0.1 Vp-p into 75 Ohm
Teletext filtering	in accordance with standard ETS 300 472
Entry teletext data	(FBAS) corresp. to ITU-R BT.653-2; lines: 6-22 and 320-335
TV-SCART:
Output	FBAS with RGB, or only FBAS, or only S-VHS (switchable)
TechniLink	data-communication via pin 10
VCR-SCART::
Input	FBAS with RGB or S-VHS
Output	FBAS or S-VHS

42