TechniSat CAM 1 plus instruction manual Hot

Problem	Possible Cause	Solution
No reception of channels pre-	Dish faulty, or position changed	Check dish
viously received
	Channel moved to another trans-	Initiate search (see point 7.7)
	ponder
	Channel no longer broadcast	None
Remote control not working	Wrong mode set	Change mode to SAT1/SAT2
	Batteries spent	Replace batteries
Time not displayed in Standby	Time not entered	Set to ZDF for 30 secs.to acquire
mode		time
Temporary interruptions on Pro 7,	Interference caused by DECT	Place telephone base station furt-
Sat.1, TM3, Cable 1, DSF and	cordless telephones	her from receiver
HOT
Unit cannot be operated	Defective data stream -> unit	Depress both up and down pro-
	blocked	gramme keys on receiver for 5
		secs. simultaneously, then switch
		on unit again

Your receiver bears the CE control label, and complies with all

relevant EU standards.

Subject to change and printing errors. Correct at 01/01

TechniSat and TechniBox CAM 1 plus are registered trademarks of

TechniSat Digital GmbH

P.O.Box 560

D-54541 Daun

Germany

www.technisat.de

333_01

45