TechniSat CAM 1 plus Serial Interface RS, PLL-Modulator, LNB power supply, KHz-Modulation, Timer

TechniLink	data-communication via pin 10
Serial Interface RS 232:
Type	RS 232 bi-directional
Bitrate	Max. 115.2 Kbit/s
Connection	9-pin D-SUB connector
Function	Pre-programming and updating operational software
PLL-Modulator:
Output range	UHF channels 21 to 69
Antenna input	47….862 MHz
Input impedance	75 Ohm
Antenna output	47…862 MHz
Output impedance	75 Ohm
LNB power supply:
LNB power	Max. 400 mA, double-insulated
LNB voltage vertical	<14.0 V no load, 11.5 V at 400 mA
LNB voltage horizontal	<20 V no load, >17.5 V at 400 mA
	LNB switched off in Standby mode
22 kHz-Modulation:	22 kHz, amplitude 0.6 V +/- 0.2 V

Programme memory/ Satellite positions:
No. of programmes user list TV:	999 TV programmes	(F1 to F999)
No. of programmes user list Radio:	999 radio programmes	(r1 to r999)
Number of Programmes:
Bouquet lists TV/Radio total of 4000 programmes possible in bouquet lists
Number of active satellite positions:
Max. 4 (DiSEqC 1.0, SAT POSITION/ SAT OPTION)
Total number of satellite position:	32

One home transponder is stored in memory for each of the 32 satellite positions. This trans- ponder facilitates automatic channel/programme search on each satellite position.

EPG Data:
EPG preview:	Maximum 7 days in advance
Memory capacity:	300 kBytes
	Programmable for a maximum of 50 programmes
Timer:
Events	Maximum 128 events, one year in advance
Remote Control System:	RC-5
Sub-system address	8 (SAT 1)
Modulation frequency	36 kHz
Infrared wavelength	950 nm

43