FNight light function – fig. F:
| This function is optional. To use it, press button 3 : this turns on the | ||||
NL | night light, which switches off and on automatically when the | ||||
transmitter detects a sound. |
|
| |||
| To turn off this function, press button 3 again. | ||||
D |
|
|
| Receiver | |
I |
|
|
| ||
|
|
| |||
Caution: to operate, the | It is portable. Clip 7 can be used to attach it to your belt, for example. | ||||
| transmitter and the receiver | Starting up: | |||
| must be set on the same | ||||
GB | To start the receiver, select channel A or B using button 4 – fig. E. | ||||
channel. | |||||
Adjust the volume with button 11. | |||||
|
|
| – if indicator lamps 5 and 10 light up steadily, the appliance is | ||
GR |
|
| monitoring. | ||
|
| – if the red indicator lamps 9 light up, the receiver is detecting sound. | |||
|
|
| |||
|
|
| – if the receiver beeps, the transmitter signal been lost (it is switched | ||
TR |
|
| off, on the wrong channel or out of range). | ||
|
| – if the recharging indicator lamp 5 is red, the batteries are low. | |||
|
|
| |||
RUS |
|
| Place the receiver on its recharging base. | ||
|
| The baby monitor transmits the sound from the room where the baby | |||
|
|
| is. If there is no sound, the appliance goes into monitor mode. When | ||
UA |
|
| a sound is detected, it is transmitted and the red indicator lamps for | ||
|
| sound level light up. Their number is proportional to the intensity of | |||
|
| the sound transmitted. The transmitter waits for a minimum sound | |||
|
|
| |||
|
|
| threshold before transmitting. | ||
PL |
|
| If you want to switch the sound off and just use the visual alarm: lower | ||
|
| the sound level to the minimum with the volume adjustment 11. | |||
|
|
| |||
CZ |
|
| Turn switch 4to OFF on the transmitter and on the receiver to turn the | ||
|
| appliance off. | |||
SK | Maintenance |
|
|
| |
|
|
| |||
H | Clean with a slightly damp cloth without detergents. | ||||
Do not let water get inside the appliances. |
BG
RO
HR
20