•Fit the lid (B) to the mixer jug (C) and lock it by positioning it on the holes opposite the spout (figure 3).
Introduce the measuring cup (A) into the lid and press into place (figure 3). You are advised to hold the lid during operation.
•Place the mixer jug (C) on the body of the motor unit (D). The lock (open) 
is aligned in the slot on the motor unit (figure 3).
•Then rotate the mixer jug (C) through a turn the lock (closed) 
appears (figure 3).
•Dice all the ingredients before putting them into the mixer jug (C). It is best to start with liquids, without going over the maximum level shown on the jug (1.5L).
•Connect the appliance and start up by turning speed selector (E) to "Pulse," "1," or "2".
•To stop the appliance, bring the speed selector (E) to "0".•Wait for the appliance back to a complete stop before removing the mixer jug (C).
•Remove the mixer jug (C) by unlocking it in opposite direction to installation.
| 2. Universal Mill: | Caution: leaks can occur |
| • This universal mill (F) is equipped with a bowl (f3) that | |
| prevents access to the blades during use. | if the accessory is not |
| • Rotate the bowl (F) and pour the ingredients. | locked correctly. |
•Position the sealing gasket (f1) in its recess on the mill blade unit (f2) (figure 4). Position the mill blade unit (f2) on the bowl (f3), and lock the universal mill by rotating the blade unit (f2) through a turn in the clockwise direction (figure 5).
•Rotate the assembled universal mill (F) and position it on the motor unit (D). The lock (open) 
is aligned in the slot on the motor unit (D) (figure 6).
•Rotate the assembled universal mill (F) though a turn anticlockwise until the lock (closed) 
appears (figure 6).
•Connect the appliance and start up by turning speed selector (E) to "Pulse," "1," or "2".
•To stop the appliance, bring the speed selector (E) to "0".
•Wait for the appliance back to a complete stop before removing the universal mill (C).
•Remove the universal mill (F) by unlocking it in opposite direction to installation.
•Turn it over on the worktop before unlocking the mill blade unit (f2) from the bowl (f3) in the reverse order of the assembly. The blades are very sharp: handle them with caution to avoid injury. You can then collect the preparation in the bowl.
Remark: The colour of the bowl may change afterblending certain very hard ingredients: cloves, cinnamon, etc…9