1800121480 GV7085 E0 GTK _110X154 01/03/11 11:52 PAGE5
PROBLEMS | CAUSES | SOLUTIONS | ||
|
|
|
| |
White streaks come | Your boiler has a | Rinse out the boiler. | ||
through the holes in the | has not been rinsed out regularly. |
|
| |
soleplate. |
|
|
| |
|
|
|
| |
Brown streaks come | You are using chemical descaling agents or | Never add this type of product in the water tank | ||
through the holes in the | additives in the water for ironing. | or in the boiler (see § “for what water may be | ||
soleplate and stain the |
| used”). Contact an Approved Service Centre. | ||
linen. |
|
|
| |
The soleplate is dirty or | You are ironing at too high a | See our recommendations regarding | ||
brown and may stain the | temperature. | temperature control setting. | ||
linen. |
|
|
| |
Your linen is not rinsed sufficiently or you | Ensure linen is rinsed thoroughly to remove any | |||
| ||||
| have ironed a new garment before washing | soap deposits or chemicals on new garments | ||
| it. | which may be sucked up by the iron. | ||
|
|
|
| |
| You are using starch. | Always spray starch on the reverse side of the | ||
|
| fabric to be ironed. | ||
|
|
|
| |
There is no steam or | Thewatertankisempty(redlightisflashing). | Fill the tank and press the "OK" button until the | ||
there is little steam. |
| indicator goes out. | ||
|
|
|
| |
| The soleplate temperature is set to the | The generator is working but steam is very hot | ||
| maximum. | and dry As a consequence, it is less visible. | ||
|
|
|
| |
Steam escapes from the | The rinse plug has not been tightened | Tighten the rinse plug correctly. | ||
rinse plug. | correctly. |
|
| |
|
|
|
| |
| The rinse plug seal is damaged. | Contact an Approved Service Centre to order a | ||
|
| new rinse plug seal. | ||
|
|
|
| |
| The generator is faulty. | Stop using the generator and contact an | ||
|
| Approved Service Centre. | ||
|
|
|
| |
The red “water tank | The water tank is empty. | Press the “OK” button on the control panel until | ||
empty” light is flashing. |
| the warning light goes out. | ||
|
|
|
| |
Steam or water escapes | The generator is faulty. | Stop using the generator and contact an | ||
under the appliance. |
| Approved Service Centre. | ||
|
|
|
| |
While ironing your steam | This is normal and is the pump injecting | Refill your water tank (see page 3 for filling the | ||
generator can make a | water into the boiler, or the steam valve | water tank) | ||
loud electric pump noise. | opening. |
|
| |
|
|
|
| |
The “anti calc” indicator | You have not pressed the “OK” button. | Press the “OK” button on the control panel | ||
is flashing. |
| until the warning light goes out. | ||
|
|
|
| |
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
If you have any problems or queries please call our Customer Relations team first for expert
help and advice: 0845 602 1454 - UK / (01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
EN DE FR NL ES PT IT DA NO SV FI TR EL PL CS SK HU SL RU UK HR RO ET LT LV
5
