SM_MIXER_PREPLINE_EO_2550865-02_2550865-02 09/12/10 16:22 Page12

- You can also increase the speed by pressing the

 

turbo button (A3): this function can be used at

 

all speeds. We recommend that it is only used

EN

briefly (a maximum of 30 seconds for thick

consistent doughs).

 

• After finishing, set the speed control (A2) to “0”.

 

• Disconnect and press the unlock button (J) to

 

raise the hinged arm. Then press the mixer unlock

 

button (K) to remove the mixer from its stand.

 

• Then press the ejection button (A1) to remove

 

the beaters or kneaders.

 

Blender function (according to model)

Check that the speed control (A2) is set to “0”.

Remove the panel at the back of the appliance and screw the Blender rod (N) anti-clockwise onto the Motor Unit (A), without forcing it, until the red dots are aligned. You will hear a small click when the red dots match up indicating that the rod is correctly positioned (fig.3).

Connect the appliance:

-Dip the Mixer rod in the preparation before starting to avoid splashing.

-Start using the speed selector (A2), (fig.2), initially at speed 1 then 2,3,4,5. Use the “Turbo” setting (A3) if the recipe requires more power.

-Stop the appliance before removing from the Blender rod (to avoid splashes).

If you feel resistance when tightening the rod it is not properly aligned. You should remove it comple- tely and re-screw correctly.

Stopping and Disconnecting the Blender rod

Select setting "0", disconnect the appliance and unscrew the Blender rod (N) by turning clockwise.

Do not use the Blender rod:

In a saucepan on the hob

Do not use it empty or with ice cubes, sugar, hard spices, to mince raw meat, dry fruit (almonds, hazelnuts, etc.)

12

Page 13
Image 13
Tefal HT411138 Blender function according to model, Stopping and Disconnecting the Blender rod, Do not use the Blender rod