Tefal lid:, Problems, king time, moving it, Check that:, good condition, Recommendations, sary, replace it, body and the lid, pressure cooker:, has burnt, check:

Problems	Recommendations	EN
If steam escapes from	That the lid is properly closed.
around the lid, check:	The position of the lid seal is the correct way up.
	That the seal is in good condition, and if neces-
	sary, replace it.
	That the lid, the seal, its seat in the lid are clean.
	That the edge of the pressure cooker pan is in
	good condition.
If steam escapes from	Check that the seal is not caught between the
around the lid together	body and the lid.
with a piercing noise:
If you cannot open the	Check that the pressure indicator is in low position.
lid:	If not, decompress and cool the pressure cooker
	under cold running water if necessary.
	Never take any action on the pressure indicator.
If food is not cooked or	The cooking time is correct.
has burnt, check:	The heat level was neither too low nor too high.
	That the operating valve was in the right position.
	The amount of liquid was sufficient for the coo-
	king time.
If food has burnt in the	Fill the pan with water and leave the pressure coo-
pressure cooker:	ker to soak for a while before washing.
	Never use bleach or chlorine products.
If one of the safety	Turn off the heat.
systems is triggered:	Leave the pressure cooker to cool down without
	moving it.
	Wait for the pressure indicator to drop down and
	open the pressure cooker.
	Check and clean the operating valve, the steam re-
	lease outlet, the safety valve and the seal.
	If the problem persists, have your pressure cooker
	checked by a TEFAL Approved Service Centre.
If you cannot fix the	Check that:
folding handles*:	• The handle release button* is mobile.
	• If the problem persists, have your pressure cooker
	checked by a TEFAL Approved Service Centre.
If you cannot fold the	• Do not force them to fold.
folding handles*:	• Make sure that you have pressed hard the
	handle release button*.

* depending on model 13