Tefal Safety Devices, If one of the safety systems is triggered, TEFAL answers your questions, - fig, - fig, - fig, Problem, First device, Second device

Safety Devices

GB

Your Wikook is equipped with several safety devices, of which two are for excess pressure.

If one of the safety systems is triggered

First device

•The safety valve releases pressure - fig. 11.

•Turn off the heat.

•Leave your Wikook to cool.

•Open it.

•Carry out complete maintenance on your Wikook (paragraph 3).

Second device

•The gasket lets steam escape between the lid and the pan - fig. 12.

•Turn off the heat.

•Leave your Wikook to cool.

•Open it.

•Have your Wikook inspected at a TEFAL-approved service centre.

TEFAL answers your questions

This appliance complies with regulations for equipment which come into contact with food.

Problem	Recommendations
If you cannot close the lid:	• Check that the lid is correctly positioned on the pan - fig 1.
	• Check that the open/close knob is in position .
	• Gently press down on the lid and turn the open/close knob.
If your Wikook has heated	• Have your Wikook inspected at a TEFAL-approved service centre.
under pressure without any
liquid inside:
If the locking pin is in the	• This is normal for the first few minutes.
up position and nothing is	• If the problem continues, check that:
escaping from the outlet	- The heat is turned up enough; if it is not, turn it up.
during cooking:	- There is enough liquid in the pan.
	- The open/close knob is in position .
	- The lid gasket is clean, in good condition and correctly in place and
	that the edge of the pan is not damaged.
	- The central section of the lid is properly screwed in place.
	• If despite these checks the problem persists:
	- Turn the open/close knob to position , and then to position
	and open.
	- Carry out complete maintenance on your Wikook (paragraph 3).

6