EN

ACCESSORIES USED:

- Blender jug (D).

2.1 - ASSEMBLING THE ACCESSORIES

•Place the multi-function head (A3) in the horizontal position: press the button (A2) and manually lower the multi- function head (A3) until it locks (the button (A2) returns to its initial position).

•Unlock the safety cover (A5) from the high-speed outlet (A4) by rotating it anti-clockwise and then remove it.

•Make sure that the appliance is switched off before locking the blender (D).

•Lock the blender jug (D) on the outlet (A4) by rotating it clockwise.

•Place the food in the blender jug, and lock the lid (D2) fitted with the measuring cap (D3), by rotating it anti- clockwise.

2.2 - USAGE

•Start by turning the selector button (A1) to the desired position (from speed 4 to Max or pulse) according to the recipe.

Use the "Pulse" position for better mixing control and for a better blending of your preparation. You can add food through the hole in the measuring cap (D3) during preparation.

•To stop the appliance, turn the button (A1) to "0". - Maximum time of use: 3 minutes.

Tips:

You can prepare:

-Finely blended soups, cream soups, stewed fruit, milkshakes and cocktails.

-Liquid batter (pancake, fritters, Yorkshire pudding, waffles, clafoutis and custard flans). If ingredients stick to the sides of the bowl when mixing, stop the appliance and wait until the blades have stopped completely. Remove the blender and push the food down onto the blades using a spatula, and put your blender back on the appliance to continue processing.

•Never fill the blender jug with boiling liquid.

•Never run the blender jug empty.

•Always use the blender jug with its lid.

•Never remove the lid before the blades have stopped completely.

•Always pour liquid ingredients into the blender jug first before adding solid ingredients.

2.3 - DISMANTLING THE ACCESSORY

•Wait for the appliance to come to a complete stop before removing the blender by unlocking it in the anti-clockwise direction and put back the cover (A5) by locking it on the outlet (A4) (clockwise).

3 - MINCING (DEPENDING ON MODEL)

ACCESSORIES USED:

-Attachment holder (E).

-Assembled mincer head (F).

3.1 - FITTING THE MINCER ATTACHMENT

•Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place.

•Place the attachment (E) and lock it in the anti-clockwise direction such that the outlet is in alignment with the appliance.

•Place the multi-function head (A3) in the horizontal position by pressing the button (A2) once again.

3.2 - ASSEMBLING THE MINCER HEAD

•Hold the body (F1) by the feed tube, with the wider opening uppermost.

•Insert the feed screw (F2) (long shaft first) into the body (F1).

•Fit the blade (F3) onto the short shaft protruding from the feed screw (F2) with the cutting edges facing outwards.

•Fit the chosen screen (F4 or F5) on the blade (F3), aligning the two lugs with the two notches in the body (F1).

•Screw the nut (F6) home on the body (F1) in the clockwise direction, without locking it.

8