Tekram Technology TR-824 manual Building Driver Diskettes

4. BUILDING DRIVER DISKETTES

4. BUILDING DRIVER DISKETTES

If you do not have the Driver Diskettes, you can create them from the Driver CD. Follow these steps to create the Driver Diskettes.

1.The system BIOS must set to boot from a CD-ROM.

2.Insert the Driver CD into the CD-ROM drive. Start the driver building by booting from the CD-ROM.

Tekram SATA Adapters Driver Diskette Make Utility starts and provides several screens with choices. Follow the steps below to correctly set up the device driver for separate operating system.

3.After the Screen appears, move the highlight bar to the TR-824entry and press <Enter>.

4.The next screen queries the TR-824 support driver database and a list of supported driver is displayed. Move the highlight bar to the driver entry and press <Enter>.

5.The next screen will show “Please insert a formatted diskette into drive A:\!! Press any key to continue. ” Insert the formatted diskette in drive A:\ and press any key to continue.

6.The next window displays the driver-building message, “Now is writing to Cylinder and copy the image file from the CD-ROM to Driver Diskette.”

7.“The Write Complete!!” Message will show on the screen when the driver is built.

TR-824 User’s Manual

12