Telect 007-0001-2600 2. Installation, —Tools and Equipment, —Technical Support, INSTALLATION CONSIDERATIONS, INSPECTION, BAY LAYOUT

2. Installation

INSTALLATION CONSIDERATIONS

! ALERT

ALERT! This product must be installed and maintained only by qualified personnel. Verify all connections meet requirements specified in local electric codes or operating company guidelines before supplying power. Protect this equipment with a fuse or breaker sufficient to interrupt power levels specified in Section 1 of this manual.

—Tools and Equipment

•7/16 in. (or 12 mm) socket for 1/4-in. bolts and KEPS nuts

•9/16 (or 14 mm) socket for 3/8-in. bolts and nuts

•#2 Phillips screwdriver (screwdriver for cross-recessed screws)

•standard electrical cabling tools (cable lacing, crimping and stripping tools, cable cutters, etc.)

—Technical Support

By e-mail: getinfo@telect.com

By phone: 888-821-4856 or 509-921-6161

INSPECTION

Compare the contents of the shipping container with the packing list. Call Telect if anything is missing.

NOTE

Telect is not liable for shipping damage.

If the shipping container is damaged, keep it for the carrier’s inspection. Notify the carrier and call Telect’s Customer Service Department:

1-800-551-4567 or 1-509-926-6000

Keep the container until you have checked equipment opera- tion. If you experience any kind of problem, call Telect’s Customer Service Department. Use the original, undamaged container if you are instructed to return the BDFB / BDCBB to Telect.

BAY LAYOUT

In a standard bay, each BDFB / BDCBB requires 10 EIA rack positions (10 RU). Up to four BDFB / BDCBB panels can populate a bay having either 19-in. or 23-in. racks (ei- ther EIA or WECO spacing).

Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700 Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com