Telect 007-0001-2600 Item, Description, Part Number

Item	Description	Part Number

Front Cover, Blank	Covers 17.5-in. space in a 23-in. rack	007-0000-0102

	Covers 17.5-in. space in a 19-in. rack	007-0000-0103

Rear Safety Cover	Clear heat-resistant wrap	007-0000-0010

Designation Label	For vertical array of 18 CB positions	122845

Internal Bus Kits	Links BATT input buses of 2 BDFB/BDCBBs3	007-0002-0010
	Links return buses of two BDFB / BDCBBs3	007-0002-0020
	Expander for input battery bus4	007-0002-0012
	Expander for return bus4	007-0002-0022
External Return Bus Kits	For 12 or 15 in. cable rack5:¾ in.c/c holes	007-0000-01156
	1 in. c/c holes	007-0000-02157
	1 in. & ¾ in. c/c holes	007-0000-03158
	For 20 in. cable rack5:¾ in. c/c holes	007-0000-01209
	1 in. c/c holes	007-0000-022010
	1 in. & ¾ in. c/c holes	007-0000-032011
	Brackets for 1.5 in.-deep cable rack12	007-0000-0121
	Brackets for a 2 in.-deep cable rack12	007-0000-0125
	Expansion, Common13	007-0000-0122
	Expansion, Insulated13	007-0000-0123
Lug Fastener Kits	For 36, dual-lug load returns14	007-0000-0225
	For 10, dual-lug load returns (spares)14	007-0000-0231
	For 4, dual-lug, input battery or returns15	007-0000-0230
	For 2, internal Input bus expanders16	007-0000-0232
Relay Racks, 7-ft Seismic	EIA with unequal flanges, white	723-0707-2130-001

	WECO with unequal flanges, white	723-0701-2130-001

	End Panel, white	071-3000-0002

Enclosed Cabinet	Standard Zone 4 for up to 4 BDFB / BDCBBs	contact Telect

1.Contact Telect for alternate circuit breakers, such as mid-trip or short delay. SEE CAUTION THAT FOLLOWS.

2.The adapter bridges adjacent single-pole CB slots for use with double-pole breakers.

3.Each expansion kit contains parts and fasteners to link adjacent (above/below) BDFB / BDCBBs in a rack. Three kits are required to link a maximum of four, 10RU BDFB / BDCBBs per rack.

4.Bracket and fasteners used to expand from four 750/777.7MCM input positions to six to accommodate up to four multiple 600A BDFB / BDCBBs in a 2400A rack.

5.Each kit contains parts and fasteners to install an overhead return bus to the plant’s 12 in,-, 15 in.-, or 20 in.-wide ladder rack system. Each copper plate handles multiple dual-lug connections for a total 600A continuous load at 800A max. load. External return buses accommodate dual lugs with ¾ in. and/or 1 in. center-to-center (c/c) hole spacings. Brackets for 1.5 in.- versus 2.0 in.-deep cable racks are ordered separately.

6.32 sets of dual holes. Lugs can be bolted to both sides for a total of 64 lug connections.

7.16 sets of dual holes. Lugs can be bolted to both sides for a total of 32 lug connections.

8.12 sets of dual holes with 1 in. center spacing; 22 sets of dual holes with ¾ in. center spacing. (Not all hole sets can be used when accommodating both types of lugs.) Lugs can be bolted to both sides.

9.38 sets of dual holes. Lugs can be bolted to both sides for a total of 76 lug connections.

Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700

Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com

Page 5-2