Telect 007-0001-2600 1. Description, — Capabilities, — Features, DUAL 600A BDFB / BDCBB, Each Panel, Full Bay of Four Panels

1. Description

DUAL 600A BDFB / BDCBB

Telect’s Dual 600A Battery Distribution Fuse Board / Circuit Breaker Board (BDFB / BDCBB), Model 007-0001-2600, contains two non-shared sets of input buses. Both sets of -48VDC/RTN input buses are capable of 600A primary distribution feed to 18 circuit breaker output positions.

The open-frame architecture of the BDFB / BDCBB allows unrestricted top-down or bottom-up cabling of inputs and outputs.

The front panel contains 18 circuit breaker positions per feed for a total of 36 per panel. Each position accepts a standard “bullet ter- minal” circuit breaker rated up to 100A, with the capability of pairing adjacent breakers for dual-pole outputs of up to 150A. Vdc Power LED, Fuse Alarm LED, and input voltage test points1 on the standard removable alarm panel2 provide input/feed monitor- ing.

Telect’s Dual 600A BDFB / BDCBB fits standard 19 in. or 23 in. racks set up for either EIA or WECO mounting. Up to four panels can be arranged in a bay3 to provide up to 2400A per feed (4800A per bay).

— Capabilities

Each Panel

•Dual Feed

•600A (Max.,Continuous) Per Feed

•800A (Max.) Interrupt Device Per Feed

•18 Outputs Per Feed; 36 Outputs Per Panel

Full Bay of Four Panels

•Dual Feed

•2400A (Max., Continuous) Per Feed

•3200A (Max.) Interrupt Device Per Feed

•72 Outputs Per Feed; 144 Outputs Per Bay

— Features

•Suitable for primary or secondary distribution

•Modular design expands capability of rack to as much as 4800A

•Open architecture provides easy input/output cabling

•Top-down or bottom-up cabling

•Standard “bullet terminal” circuit breakers (up to 100A per position)

•Breaker shunting allows double-pole, single distribution up to 150A

•Alarm and BATT monitor overcurrent protection

1.Input current test points require an optional shunt and cabling. Contact telect.com for availability. (See Section 5, Accessories.)

2.Optional removable alarm panels provide digital voltage and current meters. Contact telect.com for availability. (See Section 5, Accessories.)

3.When installing four panels in a bay, prefer a 23-in. bay rather than a 19-in. bay to reduce cable congestion.

Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700 Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com