Teledyne OT-2 operating instructions Gas Connections

Model OT-2 System Operation 3

All operator controls are located inside the system enclosure, which is hinged on the left edge and provides easy access to the transmitter, sensor and cell block inside the instrument. The main enclosure door will swing open when the slotted latch at the right center of the door is turned counter-clockwise. Allow clearance for the door to open in a 90-degree arc at a radius of 16 inches. See Figure 3-1.

3.1.3System Connections

Figure 3-2 shows the Model OT-2 System. There are ports for gas inlet and outlet, power and analog concentration output.

Figure 3-2 Front View of OT-2 System

3.1.3.1 Gas Connections

The unit is manufactured with 1/4 inch tube fittings for system installations.

Teledyne Analytical Instruments 3-3