Chapter Introduction, Models | Telenetics CDMA manual

Chapter 1

Introduction

he OMEGA OM-DIGX is an industrial-grade wireless modem that provides Code-Division TMultiple Access (CDMA2000) 1xRTT connectivity for remote communications and data

collection from the safety and comfort of the office. It is ideally suited to provide access to remote telemetry devices such as gas and electrical meters, corporate intranets from industrial vehicles and remote sites, and direct access to the Internet.

Note: The OMEGA Modem also is available as a Global System for Mobile Communications (GSM) cellular solution. For more information about the OMEGA GSM Modem, please contact Telenetics.

Models

The OMEGA CDMA Modem is available in four models:

Type I stand-alone unit

Type I stand-alone unit equipped with an optional 8-port RS-232 module

Type II stand-alone unit

Type II unit mounted on a Marwell socket adapter

The Type I and Type II OMEGA CDMA Modems are functionally identical, differing only in size.

Type I unit: 7” high x 7” wide x 3.3” deep (without antenna)

Type II unit: 4.5” high x 3.5” wide x 3.15” deep (without antenna)

Page 5

Image 5

Telenetics CDMA manual Chapter Introduction, Models

Contents

Omega Cdma Modem User’s Guide Important Notice FCC Part 15 EMI Statement FCC Radiation Exposure StatementFCC ID N7NSB555 Contents Models Chapter Introduction Introduction FeaturesOptions Installation Hardware Features Type II Omega Cdma Modem Type II Omega Cdma Modem with Marwell Socket Adapter Installation Summary Chapter Installation AT Commands Obtaining Cellular Telephone ServiceUnpacking Your Hardware Items Supplied by the User Attaching Mounting Feet stand-alone Omega Cdma Modem Installing the Optional 8-Port RS-232 ModulePower Supply Connections Omega Cdma Modem Switch Settings Description Setting the Omega DIP Switch AT Commands DTE Baud Rate Switch Baud Rate bps DTR Dial EnableAttaching a DTE Cable OFF TX+ OUT RX+ DCD OUT RTS TXD CTS RXD Configuring the Omega Cdma Modem Powering-up the ModemCall Answer Testing DTE Signal LEDs Indicating Modem Control Signals SW5 onLEDs LEDs Indicating Rssi SW5 OFF Problem Solution Chapter Troubleshooting Appendix a AT Commands Parameter Description Command Table A-1. Basic AT Commands Table A-3. Basic Action Commands Parameter Description String default is 2 seconds CLIENT= ResetCLIENT? DTR AT Command Parameter Description ~NAMVAL?0 ~NAMLCK~NAMVAL= Write Account Activation Data Table A-6. Telenetics-Proprietary Commands AT Command Line Syntax Result Codes Only until the next reset or power off Using S-RegistersAT Commands Table A-7. Result Codes Number Word Description Page Installation Appendix B Installing the 8-port RS-232 ModuleVerifying Package Contents Eight-Port Module Ports Installing the 8-port RS-232 Module Limited Product Warranty Return Merchandise Authorization RMA Procedure