Features, Options, Introduction | Telenetics CDMA instruction

Introduction

Features

All OMEGA CDMA Modem models offer the following standard features:

Dual-band support for both 800 MHz cellular and 1.9 GHz PCS bands.

Adheres to CDMA authentication as specified in CDMA2000.

Delivers data rates up to 153.6 Kbps (forward channel) and 76.8 Kbps (reverse channel).

Adheres to the IS-95A protocol.

Supports ITU-T V.34 data rates up to 14.4 Kbps.

Supports MNP 5 and ITU-T V.42 data correction, and V.42bis data compression

Supports the industry-standard AT command set.

Provides an EIA RS-232/485 interface.

Configurable anti-streaming (maximum online) time.

Options

All OMEGA CDMA Modem models also offer the following options:

Marwell socket adapter.

Low-profile antenna or external antenna.

8-port RS-232 module.

DC low-voltage power supply.

Page 6

Image 6

Telenetics CDMA manual Features, Options, Introduction

Contents

Omega Cdma Modem User’s Guide Important Notice FCC Radiation Exposure Statement FCC ID N7NSB555FCC Part 15 EMI Statement Contents Chapter Introduction Models Features OptionsIntroduction Hardware Features Installation Type II Omega Cdma Modem Type II Omega Cdma Modem with Marwell Socket Adapter Chapter Installation Installation Summary Unpacking Your Hardware Obtaining Cellular Telephone ServiceAT Commands Items Supplied by the User Installing the Optional 8-Port RS-232 Module Power Supply ConnectionsAttaching Mounting Feet stand-alone Omega Cdma Modem Setting the Omega DIP Switch Omega Cdma Modem Switch Settings Description Attaching a DTE Cable DTR Dial EnableAT Commands DTE Baud Rate Switch Baud Rate bps OFF DCD OUT RTS TXD CTS RXD TX+ OUT RX+ Powering-up the Modem Call Answer TestingConfiguring the Omega Cdma Modem LEDs LEDs Indicating Modem Control Signals SW5 onDTE Signal LEDs Indicating Rssi SW5 OFF Chapter Troubleshooting Problem Solution Appendix a AT Commands Table A-1. Basic AT Commands Parameter Description Command String default is 2 seconds Table A-3. Basic Action Commands Parameter Description CLIENT? ResetCLIENT= DTR AT Command Parameter Description ~NAMVAL= ~NAMLCK~NAMVAL?0 Write Account Activation Data AT Command Line Syntax Table A-6. Telenetics-Proprietary Commands Result Codes Using S-Registers AT Commands Table A-7. Result Codes Number Word DescriptionOnly until the next reset or power off Page Appendix B Installing the 8-port RS-232 Module Verifying Package ContentsInstallation Installing the 8-port RS-232 Module Eight-Port Module Ports Limited Product Warranty Return Merchandise Authorization RMA Procedure