36 | Vega’s |
10 Specifications
Front panel controls
●MONITOR
●INTERCOM
●PTT button
●16 digit DTMF keypad
●Volume control
●Parallel TX detect LED
●Frequency Selection
Features
Programmable Single or Dual function tones 2 or 4 wire per line (field Programmable) Up to 100 Function tones
Simplex/full duplex (field Programmable) Parallel Update
Alert tone
15 DTMF Memory Dials Programmable squelch control TX Monitor
Supervised Control
Crossmute (hardwire)
TX and RX notch filters
Special features
♦External PTT
♦External Audio Input
♦External DC input
♦Data port for Cloning
♦External Speaker Output
♦Panel Microphone
♦Internal tuning via keypad
Three Simultaneous Microphones
●Handset/Headset,
●Panel Microphone
●Desk Microphone
Specifications
Sequential tone line input and output impedance:
Local Control keying: Relay rated at 1A at 125Vac, 3A at 40Vdc
Line Input Level:
Line Output Level:
Distortion: 3% maximum at full output.
Hum and Noise: 50 dB below operating levels.
Speaker (one): 3 in, 8 ohm,
Amplifier Power: 2W maximum at 3% THD into an 8 ohm load or equivalent.
Optional Handset Earpiece Level: Adjustable level independent of speaker volume controls.
Audio Frequency Response: 61.5dB, 300 to 3000 Hz, except at the transmit tone notch frequency.
Tone Frequencies: PTT/Guard 2175Hz or 2300Hz. The monitor and frequency function tones are programmable from 400Hz to 3000Hz at 50Hz increments. Accuracy 61 Hz.
Operating Temperature Range: 0 to +70 degree C.
Power Requirements: 117 Vac, 60Hz, 25W, or 12.0 Vdc at 1A maximum.
Microphone Connection: Handset and Headset
Note: Specifications are subject to change with out notice.