Telex C-2002 technical manual System Settings Screen

18 Vega’s C-2002

PROG3 - Decrements the level setting by 1 dB (minimum of -60dB).

PROG4 - Saves the current level setting and returns to the SPKR menu.

7.3.2.3 Output Level Screens

Entering the TX output level screen allows for setting output levels.

7.3.2.3.1 TX Output Level

The TX output level is adjusted as shown on the display. This is an overall output gain control for the line. It can be used to make small adjustments to the line level performance. The typical value is 0 dB.

PROG1 - Resets level setting to default of 0dBm.

PROG2 - Increments the level setting by 1 dBm (max of +10dBm). PROG3 - Decrements the level setting by 1 dBm (min of -10dBm). PROG4 - Saves the current level setting and returns to the Line Level

Setting screen.

TX Level		0dB	back
0dBm	dwn	up
PROG1	PROG2	PROG3	PROG4

7.4 System Settings Screen

This menu is entered by selecting PROG2 from the PROGRAMMING MODE menu. Once in this mode there are 5 different menus that can be entered. Each is brought up sequentially by pressing the PROG3 button labeled next on the display.

PROG1 - Clock Set Routines.

PROG2 - Dump setup memory to another console. PROG3 - Next Menu.

PROG4 - Return to Opening Menu.

7.4.1Clock Settings Screen

System Settings

Clk Dump next back

PROG1 PROG2 PROG3 PROG4

The top line of the Clock Settings Screen holds the current time and whether the clock is set for 12 or 24 hour display. Note: The clock can also be accessed by pressing MUTE-F6-C on the keypad. This goes directly to the clock setup screen shown at the right. This bypasses the PIN number entry (if enabled) and allows a user who would normally have no access to the setup mode to access and update the clock.

PROG1 - Allows editing the minutes and hours. PROG2 - Selects between AM and PM. PROG3 - Selects between 12 and 24 hr time.

PROG4 - Saves the current settings and returns to the Opening Menu.

Clock 11:19AM 12hr Edit A/P 12/24 back

PROG1 PROG2 PROG3 PROG4

7.4.1.1 Clock Edit Screen

PROG1 - Go to Hours Settings Screen. PROG3 - Go to Minutes Settings Screen. PROG4 - Return to System Settings Screen.

7.4.1.1.1 Clock Hours Screen

PROG1 - Set Hours to 12. PROG2 - Decrease Hours by 1. PROG3 - Increase Hours by 1.

PROG4 - Return to Clock Settings Screen.

7.4.1.1.2 Clock Minutes Screen

PROG1 - Set Minutes to 0. PROG2 - Decrease Minutes by 1. PROG3 - Increase Minutes by 1.

PROG4 - Return to Clock Settings Screen.

Clock 11:19AM		12hr
Hours	Mins	back
PROG1 PROG2	PROG3	PROG4

Hours = 11

12 dwn up back

PROG1 PROG2 PROG3 PROG4

Mins = 19

0 dwn up back

PROG1 PROG2 PROG3 PROG4