Telex user manual Open and Close the Firefly P350

	The following describes the steps needed to connect the P350.
	1.	Turn off all equipment.
	2.	Slide the locking mechanism (Figure 6) to release, then lift the P350
		to its raised position.
	3.	Plug the Firefly™ P350 into an AC wall outlet (the POWER button
		will glow and one of the cooling fans will be turned on).
	4.	Audio input can be amplified by the P350 and heard over the built-in
		speakers. Connect a stereo or mono audio source, such as the
		auxiliary output of an amplifier, a wireless microphone system, CD
		player, tape player, VCR or LaserDisc to the AUDIO IN jack (use one
		of the two audio cables shown in Figure 4).
	5.	If desired, connect an external amplified, mono or stereo speaker
		system to the AUDIO OUT jack on the P350.
☞	NOTE: When a cable is plugged into the AUDIO OUT jack, the built-in
	speakers are disabled.

Figure 6. Open and Close the Firefly™ P350

Press Button

to Close

firefly®

To Open, Slide

User Manual 7