Telex P350 user manual Menu

☞NOTE: The Alignment controls are functional only when the P350 is not in “menu” mode.

MENU	This key controls the display of the on-screen control “menus.” If an
	on-screen controls “menu” item is displayed, pressing this key will make
	the display disappear (on-screen displays normally disappear after five
	seconds). To enter “menu” mode and display the first page of on-screen
	controls, press and release MENU/RESET, then press either the
	page-up or page-down double-arrow key to “step” through the “menus”
	until the desired On-Screen Control page is displayed.
RESET	To reset the Firefly™ P350 image to the original factory settings, press
	and hold MENU/RESET until the on-screen display indicates READY
	TO RESET (approximately five seconds). When the key is released the
	P350 will reset, clearing all image enhancements that you have made,
	restoring the factory settings as the default settings. (If MENU/RESET
	is released before READY TO RESET is displayed, the factory settings
	will not be restored.)
SOURCE	Press SOURCE to select video input from COMPUTER, VIDEO,
	S-VIDEOjacks. If only one video source is “live,” the screen will go
	blank for a moment, then return control to the “live” video source.
MENU/PAGE	The MENU/PAGE keys are used to step through the On-Screen control
	pages. Each subsequent press of one of the MENU/PAGE double-arrow
	keys will display another page of On-Screen controls. The 6 (page-up)
	and 7 (page-down) keys may be used at any time.
POWER	Press POWER to turn off the projector and lamp. Press POWER again
	to turn on the projector and lamp.

16 User Manual