10
C
ALLING AND
A
NSWERING
Placing Audio-only Calls and Adding Audio-Only Sites
You may be able to use your VSX systemto place an audio-only call, or you
can add an audio-onlyca ll toavideo conference. This lets you:
o
Use your system in the same way as a telephone.
o
Add audio-only participants to your video calls.
o
Add video calls toyour audio-only calls.
Other audiooptions are available if your conference room has aVSX video conferencing
system integrated with aSoundStation VTX 1000™ conferencephone.
For more information about using the SoundStation VTX 1000 conference phone, see
Using the SoundStationVTX 1000 Conferen ce Phone in Video Calls on page 28.

Placing anAudio-Only Call

You can place an audio-only call from VSX systems that have Analogue Phone or
Voice Over ISDN enabled.
To placean audio- only call from your system:
1. On the Place aCall screen,enter the number you want to call.
o
To place acall within your PBX system, enter the last four digits of
the number.
o
To delete adigit, press
Delete
on the remote control.
2. Press
Call
to place the call.

Adding an Audio-Only Call to a Video Call

To add an audio-only call after your video call connects:
1. Press
Call
on the remote control.
2. Select
Add Call
from the HangUp screen.
3. Use the number buttons on the remote control to enter the telephone
number of the audio participant that you want to add to your video
conference.
4. Press
Call
on the remote control.
5. After the audio call connects, press
Near
or
Far
to return to
the video conference.