TLV320AIC3107EVM Software | www.ti.com |
4TLV320AIC3107EVM Software
The following section discusses the details and operation of the EVM software.
Note: For configuration of the codec, the TLV320AIC3107 block diagram located in the TLV320AIC3107 data sheet is a good reference to help determine the signal routing. A pop-up detailed block diagram also is provided in the TLV320AIC3107 GUI software.
4.1Quick Start Tabs
The Quick Start USB-MODEM Configurations tab and The Quick Start Preset Configurations tab Figure 3 helps the user to begin using the GUI.
4.1.1Quick Start - USB-MODEM Configurations
Figure 2. Quick Start - USB-MODEM Configurations
The default tab is the Quick Start - USB-MODEVM tab. This tab shows two common USB-MODEVM configurations used with the AIC3107EVM. The default configuration is the USB-MODEVM Audio Interface Configuration. In this configuration, the USB-MODEVM acts as a USB sound card. Audio files can be played on the PC and targeted to the USB-MODEVM via the USB connection. On the USB-MODEVM, the TAS1020B converts the USB audio to I2S data and the I2C script data to I2C commands.
Note: For correct EVM operation, ensure that SW2 switch settings are as shown in Figure 2.
8 | TLV320AIC3107EVM-K | SLAU261–November 2008 |
Submit Documentation Feedback
