WEP Enable | Specifies whether to use encryption for transmission or not. |
Key Length | Key length specifies the level of encryption used by the N7700. |
| 64 bit: 10 characters from 0 ~ 9 and A ~ F. |
| 128 bit: 26 characters from 0 ~ 9 and A ~ F. |
WEP KEY 1 | Input up to 4 WEP keys, and select the one you wish to use. |
WEP KEY 2 | When connecting, be sure to enter the same key and select the |
WEP KEY 3 | same index number on each client machine. |
WEP KEY 4 |
|
A DHCP server can be configured to assign IP addresses to devices connected to LAN ports.
WLAN DHCP Configuration
Item | Description |
DHCP Server | Select to enable or disable DHCP server. |
Start IP | Specifies the starting IP address of the DHCP range. |
End IP | Specifies the ending IP address of the DHCP range. |
DNS Server | Specifies the DNS server IP address. |
NOTE
NOTE
The IP Segment of WLAN, WAN and LAN should not overlap.
Users should obey the international RF regulatory rules as they set up the wireless RF channel on the N7700. The RF operating channels for different regions have been specified as following. Thecus has no responsibility for users attempting to violate the international RF regulation.
11 N. America
14 Japan
13 Europe (ETSI)
2Spain
4France
WAN LAN Exchange
The N7700 is equipped with both WAN and LAN ports. The WAN LAN Exchange function allows you to exchange the functionality of these ports directly through the Web User Interface.
From the Network menu, choose the WAN LAN Exchange item, and the WAN LAN Exchange Support screen appears. Choose Enable or Disable, and click Apply to save your changes. Click Cancel to exit without saving.
Web Services Configuration
From the Network menu, choose the Service item, and the Web Service screen appears. This screen displays the service support parameters of the system. You can change any of these items and press Apply to confirm your settings. A description of each item follows:
48
