Module File | Location of the module file. |
Browse | Click to browse the folder of your PC to locate the module files. |
Install | Click to install the listed module into your N8800 |
NOTE
Modules can potentially harm your system. Only install modules from your vendor, or publishers you can trust.
Reset to Factory Default Settings
From the System menu, choose the Factory Default item and the Reset to Factory Default screen appears. Press Apply to reset the N8800 to factory default settings. Press Cancel to go back to the main menu.
Resetting to factory defaults will not erase the data stored in the hard WARNING disks, but WILL revert all the settings to the factory default values.
Upgrading System Firmware
From the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade screen appears.
Follow the steps below to upgrade your firmware:
1.Use the Browse button to find the firmware file.
2.Press Apply.
3.The beeper beeps and the Busy LED blinks until the upgrade is complete.
NOTE
WARNING
•The beeper only beeps if it is enabled in the System Notification menu.
•Check Thecus website for the latest firmware release and release notes.
Do NOT turn off the system during the firmware upgrade process. This will lead to a catastrophic result that may render the system inoperable.
59
