6.Touch the power keyÝ Confirmation tones will sound. The power limit has been activated.
Deactivate the power limitThe power limit on the cooktop can be deactivated.
1. Proceed in the same way as with the activation.
2.Touch the programming area until the symbollights up on each of the element displays.
3.Touch the power keyÝ. Confirmation tones will sound. The power limit will have been deactivated.
Indicator | lights |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Problem |
|
|
|
|
| Possible | cause |
|
| Advice/Way of rectifying it | ||
|
|
|
|
|
|
|
|
|
|
| ||
You try | to | choose | a heat setting | for an elementYoubuthave | exceeded | Deactivate the Power - Management function. | ||||||
cannot. |
|
|
|
|
| the | total | power | limit | Increaseof the cooktop's power limit. | ||
|
|
|
|
|
| the | cooktop. |
|
| Switch off or reduce the heat setting of the | ||
|
|
|
|
|
|
|
|
|
|
| elements that are working. | |
|
|
|
|
|
|
|
|
|
|
|
| |
You try | to | activate | the Powerboost | function but You | have | exceeded | Deactivate the Power - Management function. | |||||
cannot. |
|
|
|
|
| the | total | power | limit | Turnof off the elements that are working. | ||
|
|
|
|
|
| the | cooktop. |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
Turn off the display beep
The display beeps when a key is touched. This setting can be turned off:
Turn the cooktop on at the power key.
1.Set all elements to temperature level 3.
2. Turn the elements off one after another, from right to left (see picture).
3.Touch the power key for at least 5 seconds. The display will beep to con change.
To turn the display beeps back on again, repeat the steps above.
17
