Thermador PH30HS Installation Preparation, General Information, Planning Information, 457 mm

Installation Preparation

General Information Planning Information

Before using your appliance, be sure to read this manual. Pay special attention to the Important Safety Instructions located at the beginning of the manual.

This manual provides the proper installation instructions for two styles of THERMADOR PROFESSIONAL® series wall hoods:

•PHxxGS — 27” (686 mm) in depth, with widths of 36” (914 mm), 42” (1067 mm), 48” (1219 mm), and 54” (1372 mm). This model series features brushed stainless-steel canopy with halogen lamps and heat lamps.

•PHxxHS — 24” (610 mm) in depth, with widths of 30” (762 mm), 36” (914 mm), and 48” (1219 mm). This model series features brushed stainless-steel canopy with halogen lamps.

30", 36", 42", 48", 54" (762, 914, 1067, 1219, 1372mm)

18"

(457 mm)

24" & 27"

(610 & 686 mm)

Figure 1: 24” & 27” Wall Hood Overall Dimensions

Parts Included

1 – Metal transition with backdraft damper

2, 3, or 4 – Stainless steel baffle filters (depending on model size)

2 – Filter spacers

2 or 3 – Grease trays (depending on model size)

2 or 4 – Halogen lights (installed)

2 – 175W Heat lamps (on some models)

1 – Remote blower adaptor

1 – Wooden bracket used as Hood Mounting Bracket (part of install- DO NOT THROW AWAY)

1 – Fastener assortment

Use & Care Guide, Installation Manual, and Registration Card

English 3